Adds a mesh override region to the simulation environment. The mesh override region can be used to control the size of the mesh in a certain region. In DEVICE, a CHARGE solver region must be present in the objects tree for this command to work.
Supported Product: FDTD, MODE, DEVICE
Adds a mesh override region to the simulation environment.
In DEVICE, this command adds an electrical mesh which applies only to the 'CHARGE' solver.
This function does not return any data.
The following script commands will add a mesh override region in FDTD, name it, set its dimension, and set the mesh constraints. The mesh object will be set to restrict the mesh in X direction only.
# set dimension
# enable in X direction and disable in Y,Z directions
set("override x mesh",1);
set("override y mesh",0);
set("override z mesh",0);
# restrict mesh by defining maximum step size
set("set maximum mesh step",1);